C-30ZX Ozone monitor

The Eco Sensor C-30ZX Ozone monitor - Simple, Inexpensive Ozone Monitor

The C-30ZX has a very quick response time and can be used in water treatment facilities, pulp bleaching mills, ozone generator monitors, photocopier and laser printer centers, fumigation projects, HVAC and indoor air quality systems, vehicular pollution monitors, research labs and pilot plants, and anywhere ozone exposure is a possibility. It is tough and adaptable. There aren't any sensitive controls.

Benefits:

monitors your workplace constantly, displays the ozone concentration on a multicolor graphical display, and sounds an alarm when a health threat arises.
Usually no installation is needed, and non-technical staff can understand it.
Virtually no maintenance.

Features:

As ozone levels rise, the hue of the LED readout changes.
Data logger audio alert and output
connections for controlling external devices
For general oversight and ozone management
There are many available attachments, including data loggers, calibrators, and safety enclosures with heaters and 4-20 mA outputs.

Specifications:

Ozone concentration range:.02–.14 ppm (on an LED scale);.02–.30 ppm (through external data readout).
Bargraph Normally green; cautionary yellow at.05 parts per million; and red at.1 ppm (danger)
Response time: Tenths of seconds or less when ozone contacts the sensor.
HMOS (hot metal oxide semiconductor)

sensor dimensions:

85 mm x 35 mm x 60 mm (3.25 in. x 1.375 in. x 2.375 in.)
140 gram weight (5 oz)

Power requirements are 300 mA at 12 VDC. Worldwide availability of AC adapters.

Outputs include an LED bar graph, an audio alarm, a 0–3 V analog output for data loggers, and external alarm relay contacts. The alarm actuation and relay contact closure rates are configurable and are at.1 ppm (standard).